6176 Channel Strip
Out of Stock
Can I Still order?
Technical Specifications
Features
- Classic Sound of the Legendary 610 Modular Console
- Variable Input Gain and Output Levels
- Ultra Quiet Operation
- Mic, Balanced Line, and Hi-Z Inputs
- Multiple Impedance Settings
- Classic EQ
- Classic 1176LN Compression
- Stereo Interconnection via 1176-SA
- Use Mic Pre & Compressor Seperately ("Split") or in Series ("Join")
In “Join” mode, a single input signal is fed through the microphone/instrument preamp and then through the compressor.
In “Split” mode, one signal can be fed into and out of the preamp/EQ section while a second can be fed into and out of the compressor section
Connections
Preamplifier Section
| Inputs | Microphone
(Female XLR) Balanced Line (Female XLR) Unbalanced Line/Instrument (1/4" jack) (D.I.) |
| Outputs | Balanced Line (Male XLR) for use in “Split Mode" |
Compressor Section
| Input | Balanced Line (Female XLR) for use in “Split Mode” | |
| Output |
|
Controls
Preamplifier Section
| Input Select | Microphone:
500 ohm, 2 kOhm Balanced Line Hi-Z instrument: 47 kOhm, 2.2 MOhm |
| Variable
Gain (Input Feedback Control) |
5 dB increments @ -10, -5, 0, +5, +10 dB |
Output Level Control
| HF Shelf EQ | Switchable
boost/cut: 1.5, 3, 4.5, 6, 9 dB Corner Frequency Select: 4.5 kHz, 7 kHz, 10 kHz |
|
| LF Shelf EQ | Switchable
boost/cut: 1.5, 3, 4.5, 6, 9 dB Corner Frequency Select: 70 Hz, 100 Hz, 200 Hz |
|
| Other |
|
Compressor Section
| Compression Ratio |
Bypass
|
|
| Meter Select | Preamp
Output Compressor Gain Reduction Compressor Output |
Technical Specifications
| Input Impedance | Microphone
(selectable) 500 ohms or 2K ohms Balanced Line 13.8K ohms Hi-Z (selectable) 2.2 Meg ohms or 47K ohms |
| Vacuum Tubes | one
12AX7A and one 12AT7 per channel |
| Power Requirements | 115/230 volts |
| Weight | 11.75 lbs |
| Dimensions | 19" Rackmount chassis, 2U |
