FREQue II

If out of stock this item is normally available within 5-10 working days.

Technical Specifications

Weight	Bass filter (shelving) ±12dB gain from around 80Hz@6dB/8ve
Edge	Treble filter (shelving) ±12dB gain from around 8kHz@6dB/8ve
Switch	Pressed in this activates Spectral Controls

Connectors	¼" jack, three pole (balanced), Tip /in phase, Ring cold/reverse phase, sleeve 0V
Levels	Optimum results occur with input levels of +2dBu to +12dBu, maximum input level > +12dBu
Freq Response	Music inputs <20Hz to >35 kHz, modulator input DC to >35kHz
Impedance	>10k
MOD	Module8ion Input - this feeds one side of Ring Mod
MUSIC	Main Input - this feeds the other side of Ring Modulator if spectral controls are activated they vary the spectrum of this input
Breakthrough	MOD in +10dBm with no MUSIC signal, MOD out <-65dBm maximum, typically <-70dBm, same for MUSIC signal with no MOD

Connectors	¼" jack, three pole, as above
OSC	Oscillator output at ca +12dBu
Levels	For input levels of +4dBu to +12dBu output will be around¹ +4dBu - +12dBu, maximum output level around 65kHz
Freq Response	Flat from DC to a -3dB point at around 65kHz
Signal to noise	-82dB (equivalent to a good mic set to medium gain)

Fine	Varies around centre frequency by ca 5%
Tune	Varies centre frequency over selected range
Range	Selects from 4 ranges - [0.2Hz-9Hz, 2Hz-90Hz, 20Hz-900Hz and 380Hz-11kHz]

CV Inputs to each oscillator on ¼" jacks (unbalanced), 0-15V, V/Hz characteristics

Output for both oscillators @ +12dBu

¹ The modulation process involves the interaction of both inputs, and as such it is impossible to predict exact output levels